2021 New Style Screen Printing Ink - Simulated Reactivity Printing Binder LH-321H – Yiman Lanhua

-Binder for printing.

SPRINT LH-321H

-LH-321H is suitable for pigment printing of flat screen, rotary screen, platen, cutting for cotton, polyester/cotton fabric, non-woven processing, can be also used for flock paste compounding and coating of soft rubber.

Key Features and Typical Benefits:

◆ Bright color and full color yield, stable with the thickener.

◆ Soft handle of the printed fabric. Good brushing fastness and rubbing fastness.

◆ Good thermal and mechanical stability, the emulsion has good dispersing performance, can avoid blocking the printing screen.

◆ A self-cross binder, bright film-forming.

◆ Environmental product. Can be used for baby clothing.

Properties:

Applications:

1. Pigment printing recipe:

2. Process flow: Paste preparation → Rotary or screen printing → Drying → Curing (150-160℃,1.5-3 min)

Note: Detailed process should be adjusted according to preliminary tries.

Operating and safety instructions:

1. The chemicals should be added separately when preparing the printing paste, then stir evenly before use.

2. Strongly recommend using soft water, if soft water is not available, the stability needs to be tested before making the paste.

3. To ensure the safety, you should review our Material Safety Data Sheets before using this product under special conditions. MSDS is available from Lanhua. Before handling any other products mentioned in the text, you should obtain available product safety information and take necessary steps to ensure safety of use.

Package & Storage:

Plastic drum net 120 kg, can be stored for 6 months under room temperature and hermetic condition without exposure to sunlight. To ensure that the product quality is maintained, please check the period of validity of the product, and should be used up before the validity. The container should be tightly sealed when not in use. It should be stored without prolonged exposure to extreme heat and cold conditions, it may cause irreversible crusting at high temp. environment. If the product is frozen at too low temp., thaw it at warm condition, stir evenly and make tests to check the performance before use.

ATTENTION

The above recommendation are based on comprehensive studies and experience made in practical finishing. They are, however, without liability regarding property rights of third parties and foreign laws. The user should test for himself whether the product and the application are suited for his very special purposes.

We are, above all, not liable for fields and methods of application which have not been put down by us in writing.

Advice for marking regulations and protective measures can be taken from the respective safety data sheet.